Skip to content
Decovive
Recycling & Upcycling

49 Creative DIY Lamp Projects

1 Share
49 Creative DIY Lamp Projects

Most lamps are bought, plugged in and forgotten. A handmade one does more: people ask about it, it sets the mood of a corner before anything else in the room does, and it usually costs less than a designer piece with the same presence. All it takes is a cord kit, a bulb that stays cool and an object you love, whether that is an old globe, a straw hat, a box of keys or a pile of doilies.

The 49 DIY lamp projects below are sorted by where the light ends up: on the wall, on a table, hanging from the ceiling or standing on the floor. Each one explains what it brings to a room and the method behind it, so you can copy it as it is or take only the technique. Read the short guide first. Nearly every lamp that fails does so because of heat, the wrong glue or a heavy shade hung from a cord that was never meant to carry it.

Table of Contents
  1. Before You Build: Wiring, Bulbs, Glue and Cure Times
  2. Start with a certified cord kit
  3. Choose a bulb that runs cool
  4. Match the glue to the material
  5. Cutting glass, tin and cardboard
  6. Prepare natural materials
  7. Think about weight before you hang anything
  8. Wall Lights with a Story
  9. 1. Acoustic Guitar Wall Lamp
  10. 2. Vintage Tennis Racket Sconce
  11. 3. Driftwood Branch with Hanging Bulbs
  12. 4. Old Window Frame Light Box with Roses
  13. Table Lamps with a Personality
  14. 5. Clothespin Drum Shade on a Glass Bottle
  15. 6. Rainbow Building Brick Lamp
  16. 7. Layered Cake Lamp with Piped Frosting
  17. 8. Sculpted Hand Holding a Moon Globe
  18. 9. Red and Cream Lighthouse Lamp
  19. 10. Brass Diving Helmet Lamp
  20. 11. Blue and White China Mosaic Corset Lamp
  21. 12. Wooden Artist Mannequin Lamp
  22. 13. Pressed Fern and Wildflower Lantern
  23. 14. Scallop Shell Dome Lamp
  24. 15. Autumn Leaf Tree Lamp
  25. 16. White Coral Tree Sculpture Lamp
  26. 17. Pink Glass Tulip Lamp
  27. 18. Rope Coiled Lamp with Color Stripes
  28. 19. Twin Glass Lanterns on a Scrolled Stand
  29. 20. Torn Tissue Faux Stained Glass Shade
  30. Pendants Made from Found Objects
  31. 21. Split Globe Pendant
  32. 22. Cherry Blossom Parasol Pendant
  33. 23. Vintage Jelly Mold Cluster Pendant
  34. 24. Punched Tin Can Trio
  35. 25. Straw Sun Hat Pendant
  36. 26. Skeleton Key Chandelier
  37. Soft Pendants in Lace, Paper and Yarn
  38. 27. Crochet Doily Globe Pendant
  39. 28. Lace Jellyfish Pendant
  40. 29. Doily Bell Pendant on a Wire Frame
  41. 30. Tiered Pressed Flower Linen Drums
  42. 31. Pom Pom Hoop Chandelier
  43. 32. Indigo Leaf Print Drum Shade
  44. 33. Layered Cut Paper Flower Chandelier
  45. 34. Pleated Art Print Shade with Clothespins
  46. Pendants in Natural Materials, Beads and Glass
  47. 35. Stained Glass Umbrella Pendant with Crystals
  48. 36. Pressed Flower Glass Lantern
  49. 37. Silver Branch Sphere Pendant
  50. 38. Saturn Pendant with a Hammered Brass Ring
  51. 39. Pampas Grass Cloud Pendant
  52. 40. Wooden Bead Chandelier
  53. 41. Dried Lavender and Rose Cage Pendant
  54. 42. Woven Vine Ball Pendant
  55. 43. Evil Eye Bead Chandelier
  56. 44. Woven Rattan Canoe Pendant
  57. Floor Lamps That Stand Out
  58. 45. Birch Log with a Spiral Staircase
  59. 46. Drooping Flower Floor Lamp
  60. 47. Copper Fiddlehead Fern Lamp
  61. 48. Wooden Boots Floor Lamp
  62. 49. Witch Hat Floor Lamp
  63. Safety Notes Before You Switch On

Before You Build: Wiring, Bulbs, Glue and Cure Times

Start with a certified cord kit

Buy a complete lamp or pendant cord kit with a tested socket, cord and plug (look for the UL, CE or local safety mark) instead of reusing a cracked vintage cord. Table lamps need a hollow threaded lamp pipe running through the base, a socket and a harp if the shade sits on top. Plug in swag kits let you hang a pendant from a ceiling hook and run the cord to an outlet, which avoids ceiling wiring altogether. If a project has to be hardwired into a ceiling box, or several drops share one canopy, that last step is best left to an electrician.

Inside the socket, tie an underwriter's knot so a tug on the cord never pulls the wires off the screws. The ribbed side of a flat cord is the neutral and goes to the silver screw. On a lamp body made of metal, protect the cord with a rubber grommet wherever it passes through a drilled hole, because a sharp metal edge will slowly cut through the insulation.

Choose a bulb that runs cool

An incandescent bulb turns roughly 90 percent of its energy into heat, and the glass can reach temperatures that scorch paper and fabric. LED bulbs produce a small fraction of that heat, which is why they are the only sensible choice for shades made of paper, fabric, yarn, lace, straw, feathers, grass or dried flowers. Filament style LEDs give the vintage look of an Edison bulb without the heat. Keep at least a few centimeters (about 2 inches) between the bulb and any soft material, and never go above the wattage printed on the socket.

Match the glue to the material

Hot glue is quick and strong between fabric, felt, yarn and wood, but it softens with warmth, so it should never hold anything right next to the bulb. For glass, metal, shell and ceramic, use a clear industrial craft adhesive such as E6000. It becomes tacky within a few minutes and sets in about twenty, yet it needs 24 hours to cure and can take up to 72 hours to reach full strength, longer where two smooth surfaces trap the solvent. Use it near an open window. Structural joints, like a driftwood trunk fixed to a metal base, call for a two part epoxy, and the package tells you how long to clamp it.

A water based decoupage medium such as Mod Podge handles tissue paper, napkins, printed paper, fabric and pressed flowers on a shade. It feels dry within an hour but needs several weeks to cure fully, and it can slightly change the color of pressed petals, so test one flower first. For lace and string globes formed over a balloon, use fabric stiffener or thick wallpaper paste and let the shell dry for at least a full day, two if the room is humid, before you deflate the balloon.

Cutting glass, tin and cardboard

To run a cord out of a bottle or a glass base, drill with a diamond core bit at low speed and light pressure while a steady trickle of water keeps the glass cool. Wear safety glasses. If drilling feels like too much, a bottle adapter kit with a cork style socket lets the cord leave through the neck instead. Tin cans are punched with a nail and hammer after you fill them with water and freeze them solid, which stops the sides from denting. Old globes have a thick cardboard band at the equator, so score along it many times with a sharp utility knife or use an oscillating multi tool.

Prepare natural materials

Driftwood and branches carry dust, salt and sometimes insects. Brush them, soak them for a few hours in one part bleach to nine parts cold water, rinse well and let them dry for several days before they come indoors. Small pieces can also be baked on a lined tray at about 95°C (200°F) for two to four hours. Dried grasses and flowers shed less after a shake outdoors and a light mist of strong hold hairspray.

Think about weight before you hang anything

Metal keys, glass beads, stained glass and wooden beads add up quickly. A pendant cord is designed to carry the socket and a light shade, not several kilos. Heavy fixtures need a separate chain or cable fixed to a ceiling hook screwed into a joist, with the cord simply woven along it.

Wall Lights with a Story

1. Acoustic Guitar Wall Lamp

Acoustic guitar hung on a wall hanger with a warm bulb glowing inside the sound hole and a cord running to the outlet

A guitar that no longer stays in tune still has one great quality: a hollow wooden body that glows like amber when lit from inside. Hung on an ordinary guitar hanger, it reads as art during the day and becomes a soft music room light at night. It suits a reading corner, a teenager's room or a hallway where a full lamp would take up too much space.

A small LED socket is screwed to a wooden block, which is then glued with two part epoxy to the inside of the back, right under the sound hole. The cord leaves through the end pin hole at the base of the guitar, enlarged slightly with a drill, and an inline switch near the outlet makes it easy to use. Loosen the strings first so you can reach inside, then tune them back up for looks. Keep the bulb to a low wattage LED, because the body is closed and thin wood holds heat.

2. Vintage Tennis Racket Sconce

Vintage wooden tennis racket mounted on a wall as a sconce with a soft bulb glowing behind the strings

An old wooden racket with its gut strings intact turns into a wall light with a grid that throws soft lines of light onto the wall around it. It is a natural fit for a sporty boy's room, a family room with trophies or a cottage hallway, and it adds height without a single drill hole in the floor.

Fix a small plug in sconce socket to a thin wooden backing board, mount the board to the wall, and attach the racket in front of it with two small brackets screwed into the frame so it stands a few centimeters off the wall. A frosted or opal LED bulb looks best here, since a clear filament would show through the strings as a bright spot. Clean the wood with a dry cloth and a little furniture wax, and leave the worn grip as it is. That patina is the charm.

3. Driftwood Branch with Hanging Bulbs

Driftwood branch fixed to a wall with four pear shaped filament bulbs hanging on brown cords

One twisting branch carries four glowing bulbs here, and the effect is closer to sculpture than to a light fixture. It warms up a bare wall above a sideboard or a bedside table, and because the bulbs hang at different heights, it feels relaxed rather than formal. Coastal, rustic and Japandi rooms all take it well.

Choose a branch that is fully dry and cleaned as described above. Screw it to the wall through two hidden points along its back, then run four pendant cords along the top of the wood, holding them with small brass cord clips. The cords meet in a junction box at the bottom, from which a single plug in cord runs down to the outlet. Pear shaped filament LEDs keep the glow warm. Varying the drops by 10 to 15 centimeters looks natural, while equal lengths look stiff.

4. Old Window Frame Light Box with Roses

Distressed white window frame with frosted panes lit from behind and a garland of pink and cream roses

This window opens onto nothing, yet it fills a dark corner with the feeling of morning light behind frosted glass. The rose garland around the frame makes it a romantic piece for a shabby chic bedroom, a powder room or a reading nook that has no real window.

Build a shallow wooden box about 8 centimeters deep that matches the back of an old four pane window. Put a small LED socket or a strip of warm LED tape inside, then screw the window to the front. Frosted glass spray, applied in thin coats, hides the hardware while letting the light through evenly. Faux roses made of foam or clay are hot glued around the sash, and a narrow ledge at the bottom gives space for a candle or a small frame. If the window paint is old, do not sand it indoors, as many vintage frames carry lead paint. The repurposed old window ideas show other ways to give a salvaged sash a second life.

Table Lamps with a Personality

5. Clothespin Drum Shade on a Glass Bottle

Drum lampshade made of wooden clothespins clipped on wire rings above a clear glass bottle base

Wooden clothespins in weathered shades of honey and grey turn a plain drum frame into a textured shade that glows through dozens of tiny gaps. Paired with a vintage soda bottle, the lamp looks like it came from a seaside café. It is cheap, completely reversible and a great weekend project.

Strip the fabric off an old drum shade so only the rings remain, or use three wire rings joined by struts. The pins simply clip over the rings, row after row, with no glue at all. Mix old and new pins and give a few a quick wash of grey stain so the shade does not look uniform. For the base, drill a hole near the bottom of the bottle with a diamond bit under water, feed the cord up through the bottle and finish with a bottle socket adapter in the neck. You can find more ideas for empty bottles in the wine bottle crafts for home decor.

6. Rainbow Building Brick Lamp

Pastel toy building brick lamp base with a rainbow and clouds under a pleated shade with a cloud finial

Pastel toy bricks stacked into a stepped tower make a lamp base that children recognize instantly and adults secretly love. A little rainbow and two clouds on the front, plus a smiling cloud on top of the shade, keep it sweet enough for a nursery yet playful enough for a big kid's desk.

The strength comes from a threaded lamp pipe that runs straight up through the middle, so plan a hollow core one stud wide while you build. A weighted wooden plate hidden under the first layer stops the tower from tipping. Leave the bricks unglued if the base should be rebuilt later, or bond the outer rows with a solvent cement made for ABS plastic if it will stand in a busy room. A pleated fabric shade softens all the hard edges, and a cool LED keeps the plastic safe from warping.

7. Layered Cake Lamp with Piped Frosting

Stacked pink and cream glass dome lamp with white piped frosting trim and a red cherry on top

Pink and cream glass domes, a frosted column and a glossy cherry on top give this lamp the look of a celebration cake. It brings instant sweetness to a pastel bedroom, a vanity corner or a café style kitchen shelf, and it is one of those pieces that photographs beautifully.

Look for milk glass bowls, a small glass vase for the column and a footed cake stand in thrift shops. Each glass piece gets a center hole drilled with a diamond core bit under running water, and everything stacks on one lamp pipe with rubber washers between the layers. The frosting is white silicone caulk piped through a star tip, just like real icing. It skins over within an hour and cures in about a day. Choose a neutral cure silicone for less vinegar smell, and leave the glass bare where the bulb sits close to it.

8. Sculpted Hand Holding a Moon Globe

White sculpted hand with a lace cuff holding a glowing opal glass globe lamp

A pale hand cradling a glowing sphere feels calm and a little surreal, like a moon caught in midair. It works well in a minimalist bedroom, on a dressing table or among books, and because the light is a separate globe lamp, the project needs no wiring at all.

Start with a plaster or resin hand form sold for jewelry display. Wrap a strip of cotton lace around the wrist, then brush it with thin plaster of Paris so the lace hardens into a frilly cuff. Plaster sets fast, so mix only a small batch. Once dry, paint the whole hand in a chalky off white. A small opal glass globe lamp then rests in the palm, held by a dab of clear adhesive putty so it can be lifted out to change the bulb.

9. Red and Cream Lighthouse Lamp

Red and cream striped lighthouse table lamp with a brass lantern room and a gallery rail

A striped lighthouse with a brass lantern room is the kind of piece that anchors a whole nautical theme. It suits a beach house, a boy's room with a sailing story or a hallway console, and it gives off a cozy glow through the glass panes at the top.

Roll a cone from heavy poster board, tape it to a wooden base disc and cover it with three or four layers of papier mâché for strength. When dry, sand lightly, paint it cream and mask the bands for the red stripes. The lantern room is a small brass bulb cage or a glass jar inside a wire frame set on a wooden disc, with a gallery rail made from short dowels glued around the edge. The socket sits in the lantern and the cord leaves through a small hole drilled near the bottom of the base. Matte acrylic varnish protects the paint from fingerprints.

10. Brass Diving Helmet Lamp

Aged brass diving helmet lamp with glowing portholes on a wooden plinth wrapped in rope

Light shining through round portholes makes this helmet look like it has just come up from the deep. It is a bold statement for a study, a man cave or a coastal lounge, and it pairs well with leather, old maps and dark wood.

Decorative reproduction helmets sold as nautical decor are the usual starting point. Mount a socket on a small metal bracket inside so the bulb lines up with the front window, and protect the cord with a rubber grommet where it exits the side fitting. Because the whole body is metal, a grounded three prong cord is the safer choice. A wooden plinth wrapped with thick manila rope finishes the scene. Two or three warm filament LEDs look better than one bright bulb, since they light every porthole evenly.

11. Blue and White China Mosaic Corset Lamp

Dress form lamp covered in blue and white china mosaic with pearls, lace hem and a beaded blue floral shade

Broken blue and white plates, a pearl collar and a lace hem give this lamp the elegance of an old porcelain shop. It is perfect for a romantic bedroom, a dressing room or a bright entry where the blue can echo a rug or a vase nearby.

The base is a small dress form bust with a lamp pipe running through its center. Nip the china into pieces with wheeled tile nippers, arrange the printed parts so scenes and borders fall where you want them, and set each piece with tile adhesive or E6000. After a full day, fill the gaps with white unsanded grout, wipe it back and buff off the haze. Navy braid hides the edges, and faux pearl strands, a cameo and a ceramic ball at the neck add the finishing jewelry. If this technique appeals to you, the broken china mosaic projects cover the method in much more depth.

12. Wooden Artist Mannequin Lamp

Two wooden artist mannequins on a round walnut base, one holding a globe bulb above its head

One figure lifts the bulb above its head while the other sits nearby and watches, and the little scene makes a desk feel creative before any work begins. It belongs in a studio, a home office or a student's room, and it is a lovely gift for someone who draws.

Screw two wooden artist mannequins to a round walnut base from underneath. A thin brass lamp pipe stands right behind the standing figure, carrying the cord to a socket held between its raised hands. The joints of these figures move, so once the pose is right, add a drop of wood glue to each joint that must not shift. An inline switch on the cord keeps the base clean, and a large round LED bulb completes the sculptural look.

13. Pressed Fern and Wildflower Lantern

Oval paper lantern lamp with pressed ferns and wildflowers between bamboo ribs on a wooden base

Ferns, seed heads and tiny red berries float inside a paper lantern, and the light shows every vein. It brings the calm of a forest walk to a bedside table and suits cottagecore, Scandinavian and natural rooms alike. In daylight, it reads as a framed herbarium.

Press the plants in a heavy book for two to three weeks first. The lantern body is a frame of thin bamboo or cane strips bent between a top ring and a wooden base, tied at each joint with linen thread. Glue one layer of mulberry or rice paper to the frame with thinned decoupage medium, lay the plants on it with tweezers, then cover them with a second sheet so they sit between the layers. A brass cap with a small bee charm, fixed with E6000, crowns the piece. Use an LED bulb only, because paper and dried plants are flammable.

14. Scallop Shell Dome Lamp

Dome lampshade covered in overlapping pink and cream scallop shells on a distressed white wooden base

Overlapping scallop shells turn a plain dome into something that looks like a pinecone or a mermaid's scales. When the lamp is on, the shells glow pink and peach, and that warm tint makes any coastal bedroom or bathroom vanity feel softer.

Use a rigid dome shade made of metal or stiff plastic, because shells are heavy and a fabric shade would sag. Start at the bottom edge and glue the first row so the shells overhang slightly. Each new row then covers the top of the row below, exactly like roof tiles. E6000 holds shell to metal or plastic reliably, and painter's tape keeps each row in place while it sets. A distressed white candlestick base finishes the look. For more ideas with shells, take a look at the seashell crafts for coastal decor.

15. Autumn Leaf Tree Lamp

Table lamp with a twisted driftwood trunk on a brass base and a glowing crown of orange autumn leaves

A twisted driftwood trunk topped with a dense crown of orange and gold leaves gives a room the glow of a late October afternoon. It is ideal for fall decorating, yet it works all year in rustic living rooms and dens with warm wood tones.

Drill the driftwood lengthwise for a lamp pipe if it is straight enough, or cut a shallow groove down the back for the cord and cover it with a strip of bark. Fix the trunk to a heavy round metal base with two part epoxy. The crown is a wire dome or an old lampshade frame covered with silk autumn leaves attached by hot glue, working from the bottom up. Skip real dried leaves, which crumble within weeks and catch fire easily. A warm LED behind the fabric leaves gives the amber glow you see here.

16. White Coral Tree Sculpture Lamp

White coral textured tree sculpture lamp with a round bulb nested in its branches

This pale branching tree has the pitted texture of coral, and the round bulb nests in its arms like a small sun. It brings a gallery feel to a console or a side table, and it suits white, sand and stone palettes in modern coastal homes.

Shape the trunk, roots and branches from thick aluminum wire, then bulk them out with crushed foil. Cover everything with paper clay or a lightweight air dry clay, pressing the end of a brush into the surface to make the little holes that give the coral look. Let it dry slowly for several days away from heaters to avoid cracks. A dead hardwood branch coated with joint compound is a faster option with a similar result. Paint it in a matte off white, place a globe LED in a socket screwed into the main fork, and run the cord down the trunk with small clear clips.

17. Pink Glass Tulip Lamp

Pink glass tulip lamp with a curving green stem and leaf on a river stone base

A blushing glass tulip on a curving green stem makes a delicate accent for a feminine bedroom, a spring styled mantel or a dressing table. It is more of an assembly project than a craft, and the result looks like a piece from a glass studio.

The flower is a tulip shaped glass pendant shade bought ready made. The stem is a copper or brass tube bent by hand around a large can, painted with translucent green glass paint, and the leaf is cut from tinted acrylic sheet and gently curved with a heat gun. A smooth river stone forms the base. Drill it with a diamond core bit while it sits in water, then fix the stem in the hole with epoxy. A small LED bulb sits inside the tulip. If you can take a glass class, this is also a beautiful first fused glass project.

18. Rope Coiled Lamp with Color Stripes

Table lamp with base and shade wrapped in natural rope with rust and mustard rope stripes

Thick natural rope coiled around both the base and the shade gives a sturdy, nautical lamp with a handmade feel. Thin stripes of rust and mustard rope break up the beige and make it look intentional rather than rustic. It is a strong match for beach houses, boho living rooms and boys' rooms.

For the base, coil cotton or sisal rope around a cone shaped form, such as an old lamp base or a cardboard cone, gluing every few centimeters with hot glue. For the shade, use a tapered spoke frame and glue the rope only to the vertical struts, leaving small gaps between the coils so light can shine through. Swap in a colored rope for one or two rounds wherever you want a stripe. Rope fibers dry out and scorch near heat, which makes an LED the only bulb to use here.

19. Twin Glass Lanterns on a Scrolled Stand

Scrolled bronze table lamp with two hanging glass lanterns, a painted bird and star, ribbons and a bell

Two glass lanterns hang from curling iron arms, one with a small bird and one with a gold star painted on the glass. Silk ribbons and a little bell make it feel like something from a folk tale, and it brings a gentle, eclectic glow to an entryway console or a bedroom dresser.

Many second hand lamps already have scrolled arms. Give the frame a fresh coat of oil rubbed bronze spray paint and replace any worn wiring. The silhouettes are cut from thin black or brown paper and fixed to the inside of the glass with clear decoupage medium, or painted directly with glass paint. Hand dyed silk ribbons tied in loose bows add softness. Small candelabra LED bulbs are best, as they fit inside the lanterns without crowding the glass.

20. Torn Tissue Faux Stained Glass Shade

Scalloped panel lampshade covered in torn red, teal and green tissue paper on a turned wooden base

Layers of torn tissue in ruby, teal and jade turn a plain panel shade into something that glows like a church window. It brings rich color to a dark living room or a bohemian study, and it costs very little to make.

Use a paneled shade frame with a scalloped lower edge and line it with a thin, light colored paper or self adhesive lampshade liner. Tear the tissue by hand, since torn edges overlap softly while cut ones look hard. Brush decoupage medium onto a small area, lay down a piece of tissue, brush over it, and keep layering until the colors start to deepen where they overlap. Some colored tissue bleeds when wet, which can create lovely blends or unwanted stains, so test a scrap first. A turned wooden base keeps the look classic. For more shade makeovers, the unusual lampshade ideas with mixed materials are a good next step.

Pendants Made from Found Objects

21. Split Globe Pendant

Globe cut in half at the equator and hung as a pendant with brass rods holding the halves apart around a bulb

An old school globe opened at the equator becomes a pendant that throws a band of light out through the gap. It is a natural pick for a study, a reading corner or a child's room full of adventure books, and it looks especially good above a desk.

Score along the equator many times with a sharp utility knife until the halves come apart, then sand the edges. Paint the inside of both halves cream or white so they reflect light. Drill four small holes in each half and connect them with threaded brass rods, using nuts on both sides to set the gap. The pendant socket passes through a hole cut at the north pole. Use an LED filament bulb, since cardboard globes are not heat resistant.

22. Cherry Blossom Parasol Pendant

Pink paper parasol painted with cherry blossoms hung as a pendant with a clear bulb below

A pink paper parasol painted with blossoming branches hangs like a soft canopy over a reading chair or a bed. It fits Japanese inspired rooms, pastel bedrooms and spring table settings, and it adds color to a white ceiling without heavy hardware.

Cut off the handle shaft just below the runner, then thread a pendant cord down through the center and fix the socket below the ribs. If your parasol is plain, paint the branches with brown acrylic and dab on the flowers with a round brush in two shades of pink. A clear bulb hanging below the canopy keeps all the heat away from the paper, yet an LED is still the right choice. Hang it at least 75 centimeters above a table so the edge does not catch on anyone.

23. Vintage Jelly Mold Cluster Pendant

Seven fluted metal jelly molds hung at staggered heights from a round ceiling canopy as pendant lights

Seven fluted metal molds hang at staggered heights, and their ridges reflect light like little crowns. This pendant is lovely above a kitchen island, a farmhouse dining table or a baking corner, and it uses something many people already have tucked away in a drawer.

Drill a center hole in the top of each mold with a step bit and file the edge smooth. Each mold then fits over a small pendant socket, held with the socket ring. All the cords run up to a round multi light canopy, and the drops are cut to different lengths so the molds form a loose spiral. Because the shades are metal and the canopy is hardwired, ask an electrician for the final connection. Small LED filament bulbs keep the molds cool to the touch.

24. Punched Tin Can Trio

Three punched tin can pendants with star and dot patterns hanging from a brass T bar

Stars and starbursts punched into three tin cans scatter tiny points of light around the room. It is a cheerful rustic pendant for a farmhouse kitchen, a porch or a camping themed kid's room, and it shows that even the simplest recycled material can make magic.

Remove the labels, fill each can with water and freeze it overnight, adding the water in stages to stop the bottom from bulging. Tape a paper pattern around the can, lay it on a folded towel and tap a nail through each mark with a hammer. Once the ice melts, make a hole in the base with a step bit for the socket and file every sharp edge. Three plug in pendant cords hanging from a brass T bar give the finished look. Spray the inside white if you want a brighter glow.

25. Straw Sun Hat Pendant

Wide brimmed straw sun hat hung upside down from the ceiling as a pendant lampshade

A wide brimmed straw hat makes one of the easiest pendants you can make, and it brings an instant summer house feeling to a bedroom, a sunroom or a beach cottage. The woven straw throws a warm, textured light that feels like late afternoon sun.

Cut a small hole in the center of the crown, just large enough for the socket, and fix it with the socket ring on both sides. If the brim is uneven, mist it lightly with water and press it into a gentle wave by hand, then let it dry. A low wattage LED is essential, because dry straw scorches quickly. Dust it now and then with a soft brush and it will last for years.

26. Skeleton Key Chandelier

Round reclaimed wood disc pendant with antique skeleton keys hanging on brass chains around a bulb

Dozens of old keys swinging from fine chains around a single bulb make a pendant full of mystery and history. It brings a vintage, storybook touch to an entryway, a library corner or a dining room with dark wood furniture.

The top is a round wooden disc, such as the end of an old cable reel or a thick slab of reclaimed wood. Screw small eye hooks into the underside in two rings, then hang brass chains in varying lengths and attach a key to each with a jump ring. Clean rusty keys with fine steel wool and seal them with a light coat of clear lacquer. Because all that metal adds up, hang the disc from a chain fixed to a ceiling hook rather than from the cord.

Soft Pendants in Lace, Paper and Yarn

27. Crochet Doily Globe Pendant

Round pendant made of green and white crochet doilies casting lace shadows on the wall

Green and white doilies joined into a sphere cast flower shaped shadows all over the walls. This pendant softens a bedroom, a nursery or a cottage kitchen, and it is one of the best ways to show off crochet that would otherwise stay hidden in a drawer. For more yarn projects in the same color family, the green crochet ideas for handmade home decor are a nice match.

Inflate a large round balloon or a beach ball and hang it up. Soak each doily in fabric stiffener or thick wallpaper paste, squeeze out the excess and lay it on the ball, overlapping the edges well. Leave a gap at the top for the socket. Let it dry for at least one to two full days, then deflate the ball and pull it out. A coat of spray stiffener afterwards makes the shell crisp. Cotton thread burns easily, so light it with an LED only.

28. Lace Jellyfish Pendant

Lace dome pendant with long linen and lace strips and glass beads hanging like a jellyfish

A lace dome with long trailing ribbons of linen and crochet trim looks like a jellyfish drifting through the room. It brings a dreamy, bohemian mood to a bedroom or a reading corner, and the swaying strands move gently with every breeze from an open window.

Shape the dome from lace over a balloon with fabric stiffener, just like the doily globe, and glue the lower edge to a metal ring wrapped with dusty pink velvet ribbon. Hang strips of torn linen, cotton lace and macramé cord from the ring at different lengths. A few clear glass beads tied onto the cords add weight so they hang straight. An opal LED bulb gives an even, milky glow inside the lace.

29. Doily Bell Pendant on a Wire Frame

Bell shaped pendant covered in stitched cream doilies casting flower shadows on the walls

Here the doilies are stitched rather than stiffened, so the shade keeps a soft, fabric look. Large lacy shadows fall across the walls in the evening, which makes it a beautiful choice above a reading chair or in a cottage style bedroom corner.

Start with a bare bell shaped wire frame. Lay doilies of different sizes over it, filling gaps with smaller pieces, and stitch them to the wires and to each other with white cotton thread. A scalloped lace trim along the lower ring finishes the edge. Without glue, the doilies can be removed and washed whenever the shade gets dusty. Keep the bulb centered and well away from the lace.

30. Tiered Pressed Flower Linen Drums

Three tiered linen drum pendant with pressed wildflowers and wooden hoop rims

Three linen drums stacked in descending sizes, each one covered in a meadow of wildflowers, create a pendant that feels like a summer field at dusk. It works beautifully over a dining table in a country kitchen or in a stairwell with a high ceiling.

Make each drum with self adhesive lampshade liner covered in natural linen, then fix pressed wildflowers to the linen with thin matte decoupage medium, keeping the stems upright so they look like they are growing. Wooden embroidery hoops sanded smooth make the rims. The two upper drums hang from one center rod, and the smallest drum sits inside a larger hoop ring for a playful touch. Each tier gets its own small LED.

31. Pom Pom Hoop Chandelier

Hoop chandelier with yarn strands and mustard, teal, blush and cream pom poms around a bulb

Strands of yarn hung with fluffy pom poms in mustard, teal, blush and cream make a joyful chandelier for a nursery, a playroom or a boho bedroom. It is soft, colorful and impossible to look at without smiling.

Use a wooden hoop of about 40 to 50 centimeters and tie yarn strands around it every few centimeters. Make the pom poms with a pom pom maker, trim them round and tie them onto the strands at different heights. Leave the inner circle near the bulb free of strands, so the yarn hangs at least 10 centimeters from the bulb. Hang the hoop with three cords tied to the top of the pendant cord. Wool is flammable, so this is strictly an LED project.

32. Indigo Leaf Print Drum Shade

Tall drum pendant shade with blue and ochre leaf print fabric and bamboo trimmed rims

Deep blue and ochre leaves wrap around a tall drum, giving a pendant with the calm of a Mediterranean summer. It suits a blue and white kitchen, a breakfast nook or a bedroom with linen bedding, and the botanical print looks even richer when lit.

Cut a panel of printed cotton or linen to the height of the drum plus a little extra, and fix it to self adhesive lampshade liner, smoothing out every bubble. Roll it around two rings wrapped in bamboo or rattan tape, fold the extra fabric inside and secure it with fabric glue. Vertical seams can be hidden behind thin strips of the same tape. A cool running LED is all the fabric needs.

33. Layered Cut Paper Flower Chandelier

Four tiered pendant covered in cut paper flowers in pink, turquoise and yellow

Four tiers of cut paper flowers in hot pink, turquoise and saffron give this pendant the energy of a summer festival. It brings joy to a colorful dining room, a party space or a bright kitchen.

Each tier is a drum of translucent vellum or tracing paper on two wire rings. Cut flowers and leaves from layered tissue paper, glue them onto the drum with a glue stick or thinned decoupage medium, and let a few petals curl outward for depth. Since there is so much paper, light each tier with a slim LED puck light rather than a regular bulb. Battery or plug in modules both work.

34. Pleated Art Print Shade with Clothespins

Pleated pendant shade made of night sky and sunflower art prints clipped with mini clothespins, with lace and tassels

Fine art prints folded into an accordion and clipped around a ring make a pendant that feels like a gallery and a sewing room at once. Starry skies and sunflowers in the style of Van Gogh are a lovely choice, and the lace and tassels keep it feminine. It suits an art corner, a studio or a cozy kitchen.

Print or buy art prints on medium weight paper, glue them edge to edge into one long strip and fold them into pleats of about 3 centimeters. Bend the strip around a wire shade ring and clip each fold with a mini clothespin. Glue lace trim along the bottom edge and hang small tassels at intervals. Because the bulb sits below the paper, it stays cool, but use an LED anyway.

Pendants in Natural Materials, Beads and Glass

35. Stained Glass Umbrella Pendant with Crystals

Teal and amber stained glass umbrella pendant with crystal teardrops hanging from each point

Teal and amber glass in an umbrella shape, with crystal drops falling from every point, gives a jewel box glow to a dining room or a bedroom. It is a project for someone who already enjoys glasswork, and it is a beautiful one to aim for. For a gentler start, the stained glass window ideas, real and faux include several easier projects.

The copper foil technique is the usual method: cut the glass pieces from a pattern, grind the edges, wrap each one in copper foil tape and solder them together over a lamp mold. Jump rings soldered at each point hold the crystal prisms. Solder usually contains lead, so work with good ventilation, never eat at the bench and wash your hands thoroughly afterwards. A finished glass shade is heavy, so hang it on a chain fixed to a ceiling hook.

36. Pressed Flower Glass Lantern

Hexagonal brass lantern pendant with pressed wildflowers and ferns in its glass panels

Wildflowers and ferns pressed between glass panels look as if they were caught in amber. This hexagonal lantern fits a cottage kitchen, an entryway or a sunroom, and it looks just as beautiful turned off in daylight.

Take a brass framed glass lantern apart and add a second thin sheet of glass or clear acrylic to each panel. The pressed flowers sit between the two layers, held by pressure alone, so no glue touches them. Seal the edges with clear tape before refitting the panels in the frame. Keep it out of direct sun, which fades pressed petals within a season. You might also enjoy the mason jar crafts if you like pressed flowers behind glass.

37. Silver Branch Sphere Pendant

Open sphere pendant made of silver painted branches around a globe bulb casting branch shadows

Twigs painted soft silver and woven into an open sphere create a pendant that casts branch shadows across the ceiling and walls. It brings a wintry, enchanted feeling to a living room or a bedroom, and it looks especially striking against a dark wall.

Gather thin, dry branches and clean them. Bend two wire rings into a sphere frame, then weave and wire the branches around it, leaving an open front so the bulb shows. Hot glue at the crossings keeps things tidy. Spray paint the whole sphere in a champagne or silver metallic and let it dry outdoors. A globe filament LED looks best here.

38. Saturn Pendant with a Hammered Brass Ring

Banded opal glass globe pendant circled by a wide hammered brass ring like the planet Saturn

A softly banded globe circled by a hammered brass ring brings a cosmic touch to a modern living room, a teenager's room or a hallway. It looks expensive, yet the steps are quite simple.

Start with an opal glass globe shade. Paint thin bands in beige, sand and cream with a translucent glass paint, letting each band blend slightly into the next. For the ring, take a strip of brass about 4 centimeters wide, tap it all over with a ball peen hammer for texture, then bend it into a loop and rivet the ends. Two small brackets fixed to the shade fitter hold the ring at an angle. Choose an LED here too, because heat can yellow glass paint over time.

39. Pampas Grass Cloud Pendant

Fluffy round pendant made of pampas grass plumes glowing around a bulb

Soft plumes of pampas grass create a fluffy cloud of light that fills a boho bedroom or a neutral living room with warmth. It has a natural, almost weightless look, and it gives a plain ceiling a strong focal point.

Shake the plumes outdoors, then mist them with strong hold hairspray to reduce shedding. Cut them to similar lengths and push the stems into a wire basket frame or an old shade frame, fixing each with hot glue so they radiate outward in all directions. Keep the bulb inside a small glass shade at the center so no plume touches it. Pampas grass catches fire easily, so use a low wattage LED and never leave it on while you are away.

40. Wooden Bead Chandelier

Two tier chandelier made of strands of natural wooden beads on hoops with a filament bulb

Rows of natural wood beads hanging in loops from two hoops create a warm, organic chandelier. It suits Scandinavian, coastal and boho homes and works well over a dining table or in a nursery.

Use two embroidery hoops of different sizes, joined by three short cords so the smaller one hangs below. String unfinished wooden beads onto strong cotton cord or beading wire and tie each strand between two points on the hoop so it falls in a gentle swag. A small spacer bead between larger ones adds rhythm. Whitewash the beads if you want a lighter look. Because the beads add weight, hang the hoops from a chain rather than the cord.

41. Dried Lavender and Rose Cage Pendant

Bell shaped wire mesh pendant decorated with bundles of dried lavender, roses and baby's breath

Bundles of lavender, rosebuds and baby's breath tied onto a bell shaped wire cage make a pendant that looks like a garden in bloom. It suits a farmhouse kitchen, a cottage bedroom or a shabby chic dining nook.

Shape a bell from welded wire mesh, or use an old cage pendant. Tie small bundles of dried flowers with jute twine and fix them to the mesh with florist wire, letting a few stems hang loose. Keep the bulb at the center, well away from the dried flowers. Use a low wattage LED only, and plan to replace the flowers once a year, since they become brittle and dusty.

42. Woven Vine Ball Pendant

Round pendant woven from dark vine and rattan reed with a bulb glowing inside

A dark sphere of tightly woven vine gives a pendant with a strong, earthy texture. It looks right at home in a rustic dining room, a mountain cabin or a living room full of leather and wood. For more ideas in the same spirit, the natural materials DIY decor projects are worth a look.

Soak rattan reed or thin vine in warm water for about an hour so it bends without breaking. Wrap it around an inflated ball in every direction, gluing the crossings with wood glue. Leave a gap at the top for the socket. Let it dry completely, then deflate and remove the ball. A coat of dark wood stain deepens the color. The tight weave makes the light shine through in small, warm sparks.

43. Evil Eye Bead Chandelier

Cylinder chandelier made of strands of blue evil eye beads and crystal beads around a bulb

Strand after strand of blue glass beads and nazar beads catch the light like water. This chandelier brings Turkish character to a hallway, a bright living room or a Mediterranean style dining room, and the deep blue looks stunning against white walls.

Hang a single metal ring from three short chains. Thread nazar beads, faceted crystal beads and small blue glass beads onto beading wire, finishing each end with a crimp bead. Hang a strand every centimeter or two around the ring, and finish the bottom of each strand with a larger nazar bead so the lower edge reads as one even row. Glass is heavy, so support the frame with a chain and a ceiling hook.

44. Woven Rattan Canoe Pendant

Long woven rattan canoe shaped pendant hanging on two cables above a marble dining table

A long, boat shaped rattan basket floating above a dining table is a calm, elegant choice for a coastal or French country dining room. The shape follows the table, giving even light from end to end.

Look for a long woven rattan or seagrass basket, the kind sold as a canoe planter or bread basket. Fit two pendant sockets inside, spaced to match the length, and hang the basket on two cables from a linear ceiling canopy. LED filament bulbs keep the rattan cool. Hang it about 75 to 85 centimeters above the table so it lights the meal without blocking the view across the table.

Floor Lamps That Stand Out

45. Birch Log with a Spiral Staircase

Birch log lamp with a spiral staircase of wooden steps winding up to a small brass lantern

A tiny staircase winding up a birch trunk to a brass lantern looks like a home for a forest fairy. It is a dreamy piece for a child's room, a woodland themed nursery or a cozy reading corner.

Use a dry, cleaned birch log, flat at the bottom and fixed to a heavy base. Cut small wooden blocks for the steps and glue them in a spiral with wood glue, adding a small brad nail to each one for strength. A small brass carriage lantern with an LED socket sits on top. Run the cord down the back of the trunk in a shallow groove, holding it with small clips.

46. Drooping Flower Floor Lamp

White arched floor lamp shaped like a drooping flower with pale fabric petals and a green glass bud

A slender white stem bending gracefully to a cluster of pale petals turns a floor lamp into a giant snowdrop. It brings a soft, poetic touch to a bedroom, a reading corner or a minimalist living room.

Start with an arc floor lamp, or bend electrical conduit carefully into an arc, and paint it matte white. Thin bands of cord wrapped every 20 centimeters give it a gentle bamboo like look. The petals are made from cotton voile or organza stretched over shaped wire and stiffened with fabric stiffener, then hung around the socket. A green glass bead above the socket makes the calyx. A small LED tucked inside the petals keeps the fabric safe.

47. Copper Fiddlehead Fern Lamp

Copper floor lamp shaped like a curling fern frond with green patina leaves and a glowing globe

A copper stem curling into a fern frond, with leaves along its length and a glowing globe at its heart, is a striking piece of metal art. It suits Art Nouveau interiors, a botanical living room or a library corner.

The stem is built from copper strips bent to shape and riveted in segments, and the leaves are cut from copper sheet with tin snips and veined with a punch. The green patina comes from a patina solution or from fuming with ammonia and salt in a sealed tub, followed by several coats of clear lacquer to protect it. Because the body is metal, use a grounded three prong cord and protect it with grommets at every hole. This is an advanced project, but the result is unforgettable.

48. Wooden Boots Floor Lamp

Pair of carved wooden boots on a reclaimed beam with a brass floor lamp and pleated shade between them

A pair of tall wooden boots on a rough beam with a slim brass lamp between them tells a story about travel and craft. It suits a farmhouse hallway, a cabin or a western themed den.

Fix carved wooden boots, or old boot forms, to a reclaimed beam with long screws driven from underneath. Drill a hole through the beam for a brass lamp pipe and fit a floor lamp kit with a pleated linen shade. Brush the beam clean and seal it with a matte finish. Felt pads under the base protect the floor.

49. Witch Hat Floor Lamp

Floor lamp with a purple and green velvet witch hat shade with stars and a bell next to a boho daybed

A velvet witch hat with star patches and a tiny bell turns an old floor lamp into a whimsical centerpiece. It is perfect for a boho or witchy living room, a playroom or Halloween decorating, and it stays charming all year. If this mood appeals to you, the witchy living room ideas offer plenty more inspiration.

Sew the hat from velvet or felt over a stiff interfacing, with a wire sewn into the brim edge so it holds its wave. Line the inside of the cone with self adhesive lampshade liner so the fabric keeps its shape and stays away from the bulb. Hand stitched stars, a buckle band and a brass bell on the tip add the details. A turned floor lamp base painted in chalky blue and lightly sanded at the edges completes the look. Inside the hat, only an LED belongs.

Safety Notes Before You Switch On

Always unplug a lamp before you change anything on it, and buy cord kits with a recognized safety mark rather than reusing old wiring. Never use an incandescent or halogen bulb with paper, fabric, yarn, straw, grass, feathers or dried flowers. Choose LEDs, keep a clear gap between bulb and material, and do not leave these lamps on when nobody is home.

Metal lamps and shades should have a grounded cord, and every place where a cord passes through metal needs a rubber grommet. Heavy pendants need their own chain and ceiling hook, and any hardwired ceiling connection should be done by a qualified electrician.

When drilling glass or stone, wear safety glasses and keep water on the bit. Punched tin edges and nipped china are sharp, so wear gloves and file or smooth every edge. Lead solder, patina chemicals, spray paints and solvent based adhesives should only be used with good ventilation, and you should always wash your hands afterwards. Old painted frames may contain lead paint, so do not sand them indoors.

Keep cords out of walkways and away from children and pets, and use cord clips instead of staples, which can pierce the insulation. Small parts such as beads, pom poms and charms are a choking hazard for toddlers, so hang those lamps out of reach.

Every one of these lamps starts with the same simple parts. Once you have wired your first one, the rest feel familiar. If you want to keep going, the ways to repurpose and update chandeliers show how far a light fixture can be transformed.

Get New Decor Ideas by Email

Fresh DIY projects, cozy styling ideas and seasonal decor inspiration, sent to your inbox from time to time. No spam, and you can unsubscribe whenever you like.

We only use your email to send Decovive updates. See our Privacy Policy.

Related Articles

Leave a Reply

Follow us on Pinterest @decovivehome